How to Unfold EasyGo Power Chairs

How to Unfold EasyGo Power Chairs

Welcome to the EasyGo Powerchair!

 

Unfolding your EasyGo Powerchair is just as easy and fast as folding it. In just a few short steps, your EasyGo can be unfolded and you will be on your next adventure in no time! Not having to re-assemble your power chair and being able to unfold and go gives you more time and more freedom to enjoy your life.

We are going to walk you through exactly how to unfold the EasyGo Powerchair.

First, begin by locating the unlocking lever on the left side of the battery. Pull the lever towards you and gently push the seat down.

Second, With the chair fully extended, lift it by the backrest

Third, once the chair clicks back into place, unfold the anti-tipping wheels by pulling the round lever and straightening the wheels..

Fourth, unfold the top of the backrest into the seated position and you are ready to start your day!

This simple four step process is just another reason why we are so proud of our product. The EasyGo Powerchair will only make your life easier. The only question you’ll be asking yourself is, where do you want to go first?

You are now an expert at unfolding the EasyGo Powerchair! Give yourself a pat on the back. If you have any questions and want to talk to the real experts, give us a call at 1-833-709-3499 or send us an email at cs@easygomobility.com.
We can’t wait to hear from you and how we can help you and your mobility!

You are now an expert at unfolding the EasyGo Powerchair! Give yourself a pat on the back. Want to know how to fold your EasyGo Powerchair? Take a look at this article. If you have any questions and want to talk to the real experts, give us a call at 1-833-709-3499 or send us an email at cs@easygomobility.com.
We can’t wait to hear from you and how we can help you and your mobility!

How to Load Your EasyGo Electric Wheelchair into Your Vehicle

How to Load Your EasyGo Electric Wheelchair into Your Vehicle

In this short guide, you will learn about two options on how to load your EasyGo Electric Wheelchair into your vehicle for safe and easy transportation. Easy to fold and easy to load, the EasyGo Powerchair does it all. Loading the EasyGo Powerchair into your vehicle is simple and convenient due to its lightweight design. At only 45-50 pounds, depending on the model, the EasyGo can be picked up by the frame and loaded into a trunk.

 

With the Help of EasyLoad

Step 1: Fold the chair down as you would normally. If you’re not sure how to fold it, check out this guide.

 

Step 2: Unfold your EasyLoad wheels from the bottom of your chair, near the battery. Below is an image of what the wheels look like when they are properly unfolded.

Step 3: Place the wheels at the edge of your trunk, then pick up the bottom of the chair and carefully guide it into your trunk. Adjust the placement of your chair if necessary.

Without the Help of EasyLoad

Step 1: Fold the chair down as you would normally.

 

Step 2: Pick up the chair by the the upper back bar and the bar behind the wheels, as shown below. Place it in the back of your vehicle. To help prevent scratching the chair or your vehicle during the transfer, we do offer a Scratch Resistant Vehicle Pad.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop